Testing & Consultancy

Testing, Assessment and Consultancy Services

Manual on Testing Standards and Facilities

  • Qualitative Analysis
    • 1.1  Adhesion by Tape Test (page 7)
      1.2  Brushing and Roller Coating (page 10)
      1.3  Condition in Container (page 13)
      1.4  Heat Resistance (page 15)
      1.5  Rheological Properties of Sealant (page 17)
      1.6  Storage Stability (page 19)
      1.7  Visual Comparison of Colors of Paints (page 21)
      1.8  Washability (page 23)
      1.9  Weathering Resistance (page 28 to page 35)
  • Quantitative Analysis (Part 1)

    • 2.1  Colourimetry page (page 37)
      2.2  Drying and Curing Time (page 40)
      2.3  Density (page 42)
      2.4  Extrusion Rate of Sealant (page 45)
      2.5  Fineness of Grind (page 47)
      2.6  Gloss Measurement (page 50)
      2.7 Haze Measurement (page 54)
  • Quantitative Analysis (Part 2)
    • 2.8 Non-Volatile Content (page 56)
      2.9 Opacity (page 58)
      2.10 Skid and Slip Resistance (page 60)
      2.11 Taber Abrasion (page 64)
      2.12 Viscosity (page 70 to page 78)
  • Physical & Mechanical Performance Analysis (Part 1)
    • 3.1  Compression and Flexural Strength (page 79)
      3.2  Crack Bridging (page 82)
      3.3  Efflorescence (page 84)
      3.4  Flexibility (page 86)
      3.5  Hardness (page 89)
  • Physical & Mechanical Performance Analysis (Part 2)
    • 3.6  Hydrostatic Pressure (page 100)
      3.7  Impact Resistance (page 102)
      3.8  Peel Strength of Sealant (page 105)
      3.9  Pull-off Strength Test (page 107)
  • Physical & Mechanical Performance Analysis (Part 3)
    • 3.10 Puncture Resistance (page 111)
      3.11 Tear Strength (page 113)
      3.12 Tensile Strength and Elongation (page 115)
      3.13 Water Permeability (page 117)
      3.14 Water Resistance (page 121 to page 123)
  • Chemical Analysis
    • 4.1 Alkaline Resistance (Spotting Method) (page 124)
      4.2 Chemical and Stain Resistance (page 126)
      4.3 Corrosion Resistance (page 128-131)
  • Sample Preparation
    • 5.1 Automatic Film Applicator(page 132)
      5.2 Coating Thickness Gauge (page 134)
      5.3 Coring Machine (page 136)
      5.4 Lever-controlled Sample Cutter (page 137)